"SEDA has developed special Recycling equipment for VIKING, which help our development and test department to disposal of Garden devices with combustion engines in an ecosensitive way." Peter Moser (Quality Management, VIKING GmbH)
The SEDA EasyDrain is an ideal solution to drain End of life vehicles (ELV) of all liquids. Individual pumps and specialist draining tools remove virtually all liquids in a safe and efficient manor.
Specially developed and focused on smaller dismantlers, the SEDA EasyDrain concept is very successful. The engineering and economic challenge was to find an optimal combination for a clean, efficient, but fast and cost-effective solution. This Drainage station fulfills all this requirements.
You can work with the EasyDrain on 30 vehicles a day. The patented SEDA technology removes up to 98% of all fluids without spilling a drop.
There are two versions available:
- SEDA EasyDrain Basic (SEDA TankDrillingMachine „heavy duty“ mobil with 1 swingarm)
- SEDA EasyDrain Compact (SEDA SEDA TankDrillingMachine „heavy duty“ with 2 swingarms)
Basic + Compact offer 2 optional pump combinations:
- PD version: one pump for petrol (gas) and diesel
- CS version: one pump for coolant and screen wash fluid
Both versions contain the SEDA TankDrillingMachine “heavy duty”, up to 4 vacuum pumps for petrol/diesel, brake fluid, waste oil & windscreen washer fluid, a vacuum chamber, special tools to remove coolant fluid and accessories (universal pressure plugs, etc.).
SEDA EasyDrain works with different vehicle mounting systems like single ramp, single lifting ramp, double lifting ramp or a scissor ramp.
SEDA-Tank drilling machine
The remarkable Tank drilling machine drills through petrol tanks and sucks out fuel at a rate of upt to 20 liters per minute without spilling a drop. Its robust design and ease of use have made it the car dismantlers favorite around the world.
Hydraulic tilting vehicle ramp
The 3 ton vehicle ramp can be tilted vertically to find the deepest point of the fuel tank. Drilling at this point allows an extra 1-2 liters of fuel per vehicle to be removed. The forks are also hirzontally adjustable enabling easy acces of different vehicle makes and models.
Swing arm for fuel & oil removal
With swing arms for the tank drilling machine and rubber funnels, the equipment is more efficient in operation and prevent accidents caused by tripping over cables or drip trays. Allow drainage of gear and engine oil simultaneously.
1 inch EX-rated double diaphragm pumps create a powerful suction for fast evacuation. The drained fluids can be pumped more than 100 meters to external tanks. Each pump is sound proofed and color coded for quick identification and to create a harmonious work environment.
The zink coated anti slip catchement area not only prevents slipping but also prevents accidentally spilled flammable liquids to a possible ignition source.
A consistent drilling action ensures that each drilled hole has the same consistent diameter allowing them to be hermetically sealed with a SEDA-closing plug. This prevents even the smallest drops from contaminating your yard.
The patented SEDA-testing plugs for radiator and break fluid pump ressurized air into the system to enable a far higher and faster removal rate than by using suction alone.
SEDA-Brake fluid pliers
Brake fluid is simultaneously and quickly removed via 4 suction boots which are attached to the vehicles brake nipples. Should the nipples be corroded or broken then fluid can be removed direct from the vehicles brake line pipes using eigher of the two break line pliers supplied.
optional: SEDA-Quality control
The 7 liter quality control vessel allows a visual check of the fuel quality preventing oil or water contaminated fuel from ruining your good supply. Also as diesel unit available.
optional: SEDA-Gear box drilling machine
Designed especially for gear boxes without drainage screws, differentials or hard to remove sump plugs. Mobile and build tough. The SEDA-Gear box driling machine makes light work of thick cast iron, steel or aluminium gear boxes. Also available as swing arm version.
Contact us for a detailed offer.
|Air requirement:||8,5 bar - 1.350 Liter/Min.|
|Air consumption:||2.900 Liter/car|
|Drainage time:||ca. 10-12 min./car|
|Catchment area:||4,8 x 1,8 x 0,06 m|
|Dimension:||7,0 x 3,8 x 4,0 m|
|Sucking power:||Petrol: 10 l/min|
Diesel: 10 l/min
Waste oil: 3 l/min
Brake fluid: 3 l/min
Coolant fluid: 5 l/min
WS-Washer fluid: 5 l/min
|Order number:||A-51027 SEDA EasyDrain Basic|
A-51026 SEDA EasyDrain Compact