"We are more than pleased with the stations, consulting and advisory service of SEDA!" Jürgen Börgener (GM, Environ Automotive GmbH)
The SEDA SingleStation is the most advanced and efficient end of life vehicle drainage system on the market.
A modern drainage system must satisfy individual demands and fit in seamless with existing processes and automations. The SEDA SingleStation is a fully integrated system with some or the countless advantages derive from the use of powerful suction pumps in combination with the certified SEDA TankDrillingMachine. Customers appreciate the large, unobstructed area of operation, the countless field-tested, component reliability or the incredible range of accessories allowing countless variation possibilities. The SEDA SingleStation achieves a productivity rate of 40 cars per day.
Moveable staircase, swing arms, catchment area in the proven SEDA quality complete the SingleStation. It can be tailored to everyone’s individual needs and requirements.
SEDA SingleStation base units are:
• SEDA TankDrillingMachine
• SEDA GearboxDrillingMachine
• Moveable staircase
• Hydraulic tilting vehicle ramp
• Swing arm for fuel/oil removal
• Robust pumps
• Brake fluid kuli
• Catchment area
• Automatic hose wheel
• SEDA closing plugs
• SEDA testing plugs
• SEDA brake fluid pliers
The SEDA SingleStation is an All-In-One top class solution for scrap car drainage. For all who need something bigger we advise the SEDA DoubleStation, which allow you to work on two cars at the same time with just one station.
Contact us for more information about the SEDA SingleStation or other SEDA products!
Watch all recent SEDA SingleStation Videos:
SEDA SingleStation (lift fork)
SEDA-Tank drilling machine
The remarkable Tank drilling machine drills through petrol tanks and sucks out fuel at a rate of upt to 20 liters per minute without spilling a drop. Its robust design and ease of use have made it the car dismantlers favorite around the world.
An easy to move adjustable staircase ensures that vehicles of all sizes can be drained and reduce the risk of falling greatly. The raised platform enables simultaneous drainage from above and below the vehicles which enreases output.
Hydraulic tilting vehicle ramp
The 3 ton vehicle ramp can be tilted vertically to find the deepest point of the fuel tank. Drilling at this point allows an extra 1-2 liters of fuel per vehicle to be removed. The forks are also hirzontally adjustable enabling easy acces of different vehicle makes and models.
Swing arm for fuel & oil removal
With swing arms for the tank drilling machine and rubber funnels, the equipment is more efficient in operation and prevent accidents caused by tripping over cables or drip trays. Allow drainage of gear and engine oil simultaneously.
1 inch EX-rated double diaphragm pumps create a powerful suction for fast evacuation. The drained fluids can be pumped more than 100 meters to external tanks. Each pump is sound proofed and color coded for quick identification and to create a harmonious work environment.
The zink coated anti slip catchement area not only prevents slipping but also prevents accidentally spilled flammable liquids to a possible ignition source.
A consistent drilling action ensures that each drilled hole has the same consistent diameter allowing them to be hermetically sealed with a SEDA-closing plug. This prevents even the smallest drops from contaminating your yard.
The patented SEDA-testing plugs for radiator and break fluid pump ressurized air into the system to enable a far higher and faster removal rate than by using suction alone.
SEDA-Brake fluid pliers
Brake fluid is simultaneously and quickly removed via 4 suction boots which are attached to the vehicles brake nipples. Should the nipples be corroded or broken then fluid can be removed direct from the vehicles brake line pipes using eigher of the two break line pliers supplied.
optional: SEDA-Quality control
The 7 liter quality control vessel allows a visual check of the fuel quality preventing oil or water contaminated fuel from ruining your good supply. Also as diesel unit available.
optional: SEDA-Gear box drilling machine
Designed especially for gear boxes without drainage screws, differentials or hard to remove sump plugs. Mobile and build tough. The SEDA-Gear box driling machine makes light work of thick cast iron, steel or aluminium gear boxes. Also available as swing arm version.
Art.-No. A-SEDA-Single station
Contact us for a detailed offer.
|Air requirements:||8,5 bar - 1.350 liter/min|
|Consum. Evacuation:||2.900 liter/car|
|Drainage time:||app. 8-10 min/car|
|Load capacity:||3 tons|
|Compressive force:||10 tons|
|Dimensions:||Length: 9,0 meters|
Width: 3,4 meters
Height: 4,3 meters