"We are very pleased with the work of SEDA - especially the implementation, further development and launch of complete fluid evacuation systems for our partners which meet the stringent Dutch regulations." Aarnout v. Duuren (GM ARN Auto Recycling)
No more gearbox screw? The SEDA GearboxDrillingMachine is the high efficiency solution to drain waste oils from engines, transmissions and rear differentials.
The SEDA GearboxDrillingMachine evacuates waste oil by drilling into the oil casings or pans. The height adjustment and drill speed are achieved by means of a gas spring and the foot pedal. Following the drilling process a specially designed rubber boot maintains the suction pressure to allow a virtually spill free drainage. The product is designed to drain waste oils without the need for the operator to attend the process after the initial setup.
The Gearbox drill allows an easy and efficient drainage of engines, transmissions and rear differentials without or with compromised drainage plugs. An optional funnel serves an additional time saving convenience to drain
waste oils. A short distance of the suction hose is made transparent to allow visual control of the drainage process. A set of distance sleeves prevent the drill to penetrate too deep into waste oil containing containers resulting in possible damage from touching hardened gears. Proper use of distance sleeves is imperative for drill and drill bit longevity.
The SEDA GearboxDrillingMachine is a flexible system and can ideally be used in a variety of settings. The robust device is manufactured either on a mobile base with wheels or on a swing arm with integrated suction hoses. Spare parts are easily available and are assembled quickly. A special set of spare part is included.
|Compressed air supply:||8 bar|
|Air usage:||700 Liter/min|
|Special drillbit diameter:||12,5 mm|
|Drill speed:||max. 600 rpm|
|Order number:||S-52100 SEDA GearboxDrillingMachine|
(incl. suction hose, 500 sealing plugs and spare sleeve)